Nucleoside-Derived Low-Molecular-Weight Gelators as a Synthetic Microenvironment for 3D Cell Culture.

For the last few decades, many efforts have been made in developing cell culture methods in order to overcome the biological limitations of the conventional two-dimensional culture. This paradigm shift is driven by a large amount of new hydrogel-based systems for three-dimensional culture, among other systems, since they are known to mimic some living tissue properties. One class of hydrogel precursors has received interest in the field of biomaterials, low-molecular-weight gelators (LMWGs). In comparison to polymer gels, LMWG gels are formed by weak interactions upon an external trigger between the molecular subunits, giving them the ability to reverse the gelation, thus showing potential for many applications of practical interest. This study presents the use of the nucleoside derivative subclass of LMWGs, which are glyco-nucleo-bola-amphiphiles, as a proof of concept of a 3D cell culture scaffold. Physicochemical characterization was performed in order to reach the optimal features to fulfill the requirements of the cell culture microenvironment, in terms of the mechanical properties, architecture, molecular diffusion, porosity, and experimental practicality. The retained conditions were tested by culturing glioblastoma cells for over a month. The cell viability, proliferation, and spatial organization showed during the experiments demonstrate the proof of concept of nucleoside-derived LMWGs as a soft 3D cell culture scaffold. One of the hydrogels tested permits cell proliferation and spheroidal organization over the entire culture time. These systems offer many advantages as they consume very few matters within the optimal range of viscoelasticity for cell culture, and the thermoreversibility of these hydrogels permits their use with few instruments. The LMWG-based scaffold for the 3D cell culture presented in this study unlocked the ability to grow spheroids from patient cells to reach personalized therapies by dramatically reducing the variability of the lattice used.

Field-flow fractionation for nanoparticle characterization.

This review presents field-flow fractionation: The elements of theory enable the link between the retention and the characteristics of the nanometer-sized analytes to be highlighted. In particular, the nature of force and its way of being applied are discussed. Four types of forces which determine four types of techniques were considered: hydrodynamic, sedimentation, thermal, and electrical; this is to show the importance of the choice of technique in relation to the characterization objectives. Then the separation performance is presented and compared with other separation techniques: field-flow fractionation has the greatest intrinsic separation capability. The characterization strategies are presented and discussed; on the one hand with respect to the characteristics needed for the description of nanoparticles; on the other hand in connection with the choice of the nature of the force, and also of the detectors used, online or offline. The discussion is based on a selection of published study examples. Finally, current needs and challenges are addressed, and as response, trends and possible characterization solutions.

Characterization of Glioblastoma Cancer Stem Cells Sorted by Sedimentation Field-Flow Fractionation Using an Ultrahigh-Frequency Range Dielectrophoresis Biosensor.

Cancer stem cells (CSCs) appear to be an essential target for cancer therapies, in particular, in brain tumors such as Glioblastoma. Nevertheless, their isolation is made difficult by their low content in culture or tumors (<5% of the tumor mass) and is essentially based on the use of fluorescent or magnetic labeling techniques, increasing the risk of differentiation induction. The use of label-free separation methods such as sedimentation field-flow fractionation (SdFFF) is promising, but it becomes necessary to consider a coupling with a detection and characterization method for future identification and purification of CSCs from patient-derived tumors. In this study, we demonstrate for the first time the capability of using an ultrahigh-frequency range dielectrophoresis fluidic biosensor as a detector. This implies an important methodological adaptation of SdFFF cell sorting by the use of a new compatible carrier liquid DEP buffer (DEP-B). After SdFFF sorting, subpopulations derived from U87-MG and LN18 cell lines undergo biological characterization, demonstrating that using DEP-B as a carrier liquid, we sorted by SdFFF subpopulations with specific differentiation characteristics: F1 = differentiated cells/F2 = CSCs. These subpopulations presented high-frequency crossover (HFC) values similar to those measured for standard differentiated (around 110 MHz) and CSC (around 80 MHz) populations. This coupling appeared as a promising solution for the development of an online integration of these two complementary label-free separation/detection technologies.

Biomaterials for Three-Dimensional Cell Culture: From Applications in Oncology to Nanotechnology.

Three-dimensional cell culture has revolutionized cellular biology research and opened the door to novel discoveries in terms of cellular behavior and response to microenvironment stimuli. Different types of 3D culture exist today, including hydrogel scaffold-based models, which possess a complex structure mimicking the extracellular matrix. These hydrogels can be made of polymers (natural or synthetic) or low-molecular weight gelators that, via the supramolecular assembly of molecules, allow the production of a reproducible hydrogel with tunable mechanical properties. When cancer cells are grown in this type of hydrogel, they develop into multicellular tumor spheroids (MCTS). Three-dimensional (3D) cancer culture combined with a complex microenvironment that consists of a platform to study tumor development and also to assess the toxicity of physico-chemical entities such as ions, molecules or particles. With the emergence of nanoparticles of different origins and natures, implementing a reproducible in vitro model that consists of a bio-indicator for nano-toxicity assays is inevitable. However, the maneuver process of such a bio-indicator requires the implementation of a repeatable system that undergoes an exhaustive follow-up. Hence, the biggest challenge in this matter is the reproducibility of the MCTS and the associated full-scale characterization of this system's components.

Characterization of volcanic ash nanoparticles and study of their fate in aqueous medium by asymmetric flow field-flow fractionation-multi-detection.

Dimensional and elemental characterization of environmental nanoparticles is a challenging task that requires the use of a set of complementary analytical methods. Asymmetric flow field-flow fractionation coupled with UV-Vis, multi-angle laser light scattering and ICP-MS detection was applied to study the nanoparticle fraction of a volcanic ash sample, in a Milli-Q water suspension at pH 6.8. It has been shown that the separated by sedimentation nanoparticle fraction of the Klyuchevskoy volcano ash suspension contains 3 polydisperse populations for which size ranges (expressed in gyration radius, rG), hydrodynamic behaviours (evaluated via shape index) and elemental compositions are different. These 3 populations did not dissolve over the 72-h study but aggregated and settled out differently. Thus, the population of particles with gyration radii <140 nm (P1), which contained 6% Al2O3 and represented approximately 20% by mass of the nanoparticle fraction, remained in suspension without observable aggregation. The populations P2 and P3, which represented 67% and 13% by mass in the initial suspension, covered the rG range 25-250 nm and contained 17% and 15% Al2O3, respectively. Over time, populations P2 and P3 aggregated and their concentration in suspension at 72 h decreased by approximately 40% compared with the initial suspension. The decrease of these nanoparticle populations occurred either from the beginning of the temporal monitoring (P2) or after 30 h (P3). Aggregation generated a new population (P4) in suspension with rG up to 300 nm and mostly consisting of P2. This population represented only up to 6 to 7% of the nanoparticle fraction and decreased beyond 50 h. As a result, the trace elements present in the nanoparticle fraction and monitored (Cu and La) were also no longer found in the suspension. The results obtained can offer additional insights into the fate of volcanic ash nanoparticles in the environment.

Centrifugal ultrafiltration preconcentration for studying the colloidal phase of a uranium-containing soil suspension.

The objective of this work was to explore centrifugal ultrafiltration (UF) to separate and / or preconcentrate natural colloidal particles for their characterization. A soil suspension obtained by batch leaching was used as a laboratory reference sample. It was preconcentrated with concentration factors (CF) varying from 10 to 450. The dimensional analysis of the colloidal phase was carried out by Asymmetric Flow Field-Flow Fractionation (AF4)-multidetection. The colloidal masses were estimated by mass balance of the initial suspension, its concentrates and filtrates. The size-dependent distribution (expressed in gyration radius) and total colloidal mass (especially recovery), as well as chemical composition and concentration (including species partitioning between dissolved and colloidal phases) were determined to assess the effects of UF preconcentration on colloidal particles. The gyration radius of the colloidal particles recovered in these concentrated suspensions ranged from about 20 nm to over 150 nm. Neither de-agglomeration nor agglomeration was observed. However, only (64 ± 4) % (CF = 10) of the colloidal particles initially in the soil suspension were found in the recovered concentrated suspensions, and this percentage decreased as CF increased. The filter membrane trapped all other particles, mainly the larger ones. Whatever the CF, the centrifugal UF did not appear to change the dissolved-colloidal partitioning of certain species (Al, organic carbon); whereas it led to an enrichment of the colloidal phase for others (Fe, U). The enrichment rate was specific to each species (15% for Fe; 100% for U). By fitting the observed trends (i.e. conservation, depletion or enrichment of the colloidal phase in the concentrate) as a function of CF, the colloidal concentrations (total and species) were assessed without bias. This methodology offers a new perspective for determining physicochemical speciation in natural waters, with a methodology applicable for environmental survey or site remediation studies.

Platinum group elements contamination in soils: Review of the current state.

Platinum group elements (PGE: Ru, Rh, Pd, Os Ir, Pt) are rare metals with low abundance in the continental crust. The elements of the palladium subgroup of PGE (PPGE: Pt, Pd, Rh) have been exploited more and more over the last thirty years for their physicochemical properties such as high melting point, high resistance to corrosion, mechanical strength and ductility. This led to emerging environmental contamination in different media such as air, road dust, soil, sediment, vegetation, and snow. The aim of this review is to summarize the available data on soil contamination by PPGE and its potential environmental impact. In this paper, the environmental issue of PPGE is discussed with regard to their anthropogenic emission and fate, which includes speciation, possible transformations into bioavailable forms and toxicity. Soil contamination by PPGE is described taking into account urban and non-urban areas. The analytical determination process is also discussed.

Self-Assembly of Nucleoside-Derived Low-Molecular-Weight Gelators: A Thermodynamics and Kinetics Study on Different Length Scales.

Biocompatible materials are of paramount importance in numerous fields. Unlike chemically bridge polymer-based hydrogels, low-molecular-weight gelators can form a reversible hydrogel as their structures rely on noncovalent interaction. Although many applications with this type of hydrogel can be envisioned, we still lack their understanding due to the complexity of their self-assembly process and the difficulty in predicting their behaviors (transition temperature, gelation kinetics, the impact of solvent, etc.). In this study, we extend the investigations of a series of nucleoside-derived gelators, which only differ by subtle chemical modifications. Using a multitechnique approach, we determined their thermodynamic and kinetic features on various scale (molecular to macro) in different conditions. Monitored at the supramolecular level by circular dichroism as well as macroscopic scales by rheology and turbidimetry, we found out that the sol-gel and gel-sol transitions are greatly dependent on the concentration and on the mechanisms that are probed. Self-assembly kinetics depends on hydrogel molecules and is modulated by temperature and solvent. This fundamental study provides insight on the impact of some parameters on the gelation process, such as concentration, cooling rate, and the nature of the solvent.

Comparison of preconcentration methods of the colloidal phase of a uranium-containing soil suspension.

Three methods of membrane separation by dead-end, tangential, and centrifugal ultrafiltration (UF) were considered in order to understand the physicochemical phenomena occurring during the preconcentration of the colloidal phase of soil water. The analytical approach used involved dynamic light scattering (DLS), transmission electron microscopy (TEM), determination of total organic carbon (TOC-metry) and mass spectrometry (ICP-MS). The mass amounts of the major components of the colloidal phase, i.e. Al, Fe and total organic carbon (TOC), as well as the mass amount of uranium considered as a trace element of environmental interest, were determined, both in soil water, and in the concentrates (i.e. retentates) and filtrates of this water obtained by the 3 methods tested. Dead-end ultrafiltration led to an enlargement of the size distribution towards larger sizes because of agglomeration/aggregation phenomena. This method also generated enrichment of concentrates, in particular in organic matter. The consequence was that large structures were observed coating or embedding the particles initially present individually dispersed in the test sample. The mass amounts of elements and TOC increased more importantly than expected, which confirmed the enrichment of the concentrates from the dissolved phase probably by sorption on colloidal objects. To a lesser extent similar effects were observed after tangential ultrafiltration. Such phenomena were not observed after centrifugal ultrafiltration. From a practical point of view, both tangential and centrifugal ultrafiltration proved to be both the most practical and the best suited for the preconcentration of soil water sample. Finally, centrifugal ultrafiltration has proved to be the best compromise given the preservation of colloidal particles and method practicality.

Separation of nanoparticles from polydisperse environmental samples: comparative study of filtration, sedimentation, and coiled tube field-flow fractionation.

Nanoparticles (NPs) in the environment have a potential risk for human health and the ecosystem due to their ubiquity, specific characteristics, and properties (extreme mobility in the environment, abilities to accumulate of toxic elements and penetrate into living organisms). There is still a gap in studies on the chemical composition of natural NPs. The main reason is the difficulty to recover NPs, which may represent only one-thousandth or less of the bulk environmental sample, for further dimensional and quantitative characterization. In the present study, a methodology for the recovery of the nanoparticle fraction from polydisperse environmental samples was developed taking as example volcanic ashes from different regions of the world. For the first time, three separation methods, namely, filtration through a 0.45-µm membrane, sedimentation, and coiled tube field-flow fractionation (CTFFF), were comparatively studied. The separated fractions were characterized by laser diffraction and scanning electron microscopy and then analyzed by inductively coupled plasma atomic emission and mass spectrometry. It has been shown that all three methods provide the separation of NPs less than 400 nm from the bulk material. However, the fraction separated by sedimentation also contained a population (5% in mass) of submicron particles (~ 400-900 nm). The filtration resulted in low recovery of NPs. The determination of most trace elements was then impossible; the concentration of elements was under the limit of detection of the analytical instrument. The sedimentation and CTFFF made it possible to determine quantifiable concentrations for both major and trace elements in separated fractions. However, the sedimentation took 48 h while CTFFF enabled the fractionation time to be decreased down to 2 h. Hence, CTFFF looked to be the most promising method for the separation of NPs followed by their quantitative elemental analysis.

Nanoanalytics: history, concepts, and specificities.

This article deals with analytical chemistry devoted to nano-objects. A short review presents nano-objects, their singularity in relation to their dimensions, genesis, and possible transformations. The term nano-object is then explained. Nano-object characterization activities are considered and a definition of nanoanalytics is proposed. Parameters and properties for describing nano-objects on an individual scale and on the scale of a population are also presented. They enable the specificities of analytical activities to be highlighted in terms of multi-criteria description strategies and observation scale. Special attention is given to analytical methods, their dimensioning and validation.

Colloidal mobilization from soil and transport of uranium in (sub)-surface waters.

An analytical methodology was developed to characterize the colloidal distribution of trace elements of interest in environmental waters sampled in a same site and enables the different colloidal distributions from waters to be compared. The purpose was to provide consistent information related to the origin and nature of colloids responsible for the transport of trace element(s). The work was motivated by the observed enhanced mobility of uranium in soil. The colloidal size continuum was investigated by a multi-technique approach involving asymmetric flow field-flow fractionation (AF4) coupled with ultraviolet spectroscopy (UV), multi angle light scattering (MALS), and atomic mass spectrometry (ICPMS). To take into consideration the size and shape variability specific to each sample, the size distributions were established from the gyration radii measured from MALS, also considering the size information from standard nanospheres fractionated by AF4. A new parameter called "shape index" was proposed. It expresses the difference in hydrodynamic behavior between analytes and spherical particles taken as reference. Under AF4 diffusion conditions, it can be considered as an evaluator of the deviation from the sphericity of the fractionated analytes. AF4-UV-MALS-ICPMS enabled the dimensional and chemical characteristics of the colloidal size continuum to be obtained. As a "proof of concept", the developed methodology was applied at a field scale, in a reference study site. In order to have a "dynamic understanding", the investigation was based on the joint characterization of colloids from surface waters and soil leachates from static and dynamic processes. In the water samples of the study site, the continuum of gyration radius ranged from a few nanometers up to 200 nm. Colloids containing iron, aluminum, and organic carbon were involved in the uranium transport in the soil column and surface waters. The colloidal uranium concentration in the surface water increased from the upstream location (approximately 13 ng (U) L-1) to the downstream location (approximately 60 ng (U) L-1).

Characterization of polymer-coated CdSe/ZnS quantum dots and investigation of their behaviour in soil solution at relevant concentration by asymmetric flow field-flow fractionation - multi angle light scattering - inductively coupled plasma - mass spectrometry.

A careful separation, identification and characterization of polymer-coated quantum dots (P-QDs) in complex media such as soil solution is the key point to understand their behaviour and to accurately predict their fate in the environment. In the present study, a synthesized CdSe/ZnS core/shell P-QDs suspension, proved to be stable for at least six months, was investigated with respect to P-QDs dimension, structure and elemental composition. Separation of P-QDs and size distribution determination were carried out by Asymmetric Flow Field-Flow Fractionation (AF4) - Multi Angle Light Scattering (MALS). AF4 and MALS were coupled to Inductively Coupled Plasma-Mass Spectrometry (ICPMS) as a selective and sensitive technique for the detection and the characterization of metallic and metalloid analytes. The exploration of element-specific data obtained by ICPMS after AF4 separation enabled the signal to be deconvoluted reliably. Thus, 3 classes of size populations were identified from the whole population of P-QDs. Additionally, a soil solution and a mix of P-QDs suspension with soil solution were characterized by the same method. This strategy enabled the P-QD population, which interacted with the soil solution, to be determined, this interaction leading either to an aggregation or dissolution of the P-QDs. Reproducibility and recovery of the size distributions and element concentrations were examined for each sample. Complementarily, Dynamic Light Scattering (DLS) and Scanning Transmission Electron Microscopy (STEM) were used jointly with AF4-MALS-ICPMS in order to demonstrate all potentialities of this coupling technique.

Gold and silver quantification from gold-silver nanoshells in HaCaT cells.

A method to determine total gold (Au) and/or silver (Ag) elemental concentrations from gold nanoparticles, Au-Ag nanoshells (NS) and silica coated Au-Ag nanoshells was developed, evaluated and validated. Samples were mineralized in a mixture of concentrated aqua regia and hydrofluoric acid at 65 °C for 4 h. Mineralized solutions were diluted and standard solutions were prepared in aqua regia 5%. ICP-MS analysis was performed with or without the use of a reaction cell (CRC). For the determination of elemental concentrations of nanopowders and test suspensions, the average recovery was 99 ±â€¯2% and 101 ±â€¯2% for gold and silver respectively. The repeatability was evaluated by the Relative Standard Deviation (RSD). The overall analytical RSD was ≤4% (n = 3) and the RSD associated to ICP-MS analysis was ≤2% (n = 10). The limits of detection were 0.005 and 0.002 µg(element) L-1 (analyzed solution), and the limits of quantitation 0.017 and 0.005 µg(element) L-1 (analyzed solution), for 197Au and 109Ag respectively. The Ag/Au mass ratios of the NS in the different samples considered were all equal to (0.93 ±â€¯0.04). From this information, the average thickness of gold and silver layers in the nanoshells was deduced, being 7.5 ±â€¯0.5 and 23 ±â€¯3 nm respectively. Finally, the developed method was successfully applied to in vitro studies to evaluate NS cellular uptake in HaCaT keratinocyte cells confirming the method robustness toward biological medium. Experiments in cell culture medium gave coherent concentrations, 70-100% of uncoated or silica-coated NS being recovered, distributed between the culture medium and the cells (internalized). The analytical repeatability (over the whole procedure, or that of the ICP-MS analysis only) remains in the same order of magnitude as in test suspensions. Minimum concentrations less than or equal to 1 µg(element) g-1(suspension) were determined with the same accuracy.

Design and Cellular Fate of Bioinspired Au-Ag Nanoshells@Hybrid Silica Nanoparticles.

Silica-coated gold-silver alloy nanoshells were obtained via a bioinspired approach using gelatin and poly-l-lysine (PLL) as biotemplates for the interfacial condensation of sodium silicate solutions. X-ray photoelectron spectroscopy was used as an efficient tool for the in-depth and complete characterization of the chemical features of nanoparticles during the whole synthetic process. Cytotoxicity assays using HaCaT cells evidenced the detrimental effect of the gelatin nanocoating and significant induction of late apoptosis after silicification. In contrast, PLL-modified nanoparticles had less biological impact that was further improved by the silica layer, and uptake rates of up to 50% of those of the initial particles could be achieved. These results are discussed considering the effect of nanosurface confinement of the biopolymers on their chemical and biological reactivity.

Diffusive Milli-Gels (DMG) for in situ assessment of metal bioavailability: A comparison with labile metal measurement using Chelex columns and acute toxicity to Ceriodaphnia dubia for copper in freshwaters.

Fluctuations in concentrations of bioavailable metals occur in most natural waters. In situ measurements are desirable to predict risks of adverse effects to aquatic organisms. We evaluated Diffusive Milli-Gels (DMG), a new in situ passive sampler, for assessing the bioavailability and toxicity of copper in waters exhibiting a wide range of characteristics. The performance was compared to an established Chelex-column method that measures labile copper concentrations by discrete sampling, and the ability to predict acute toxicity to the cladoceran, Ceriodaphnia dubia. The labile copper concentrations measured by the DMG and Chelex-column methods decreased with increasing dissolved organic carbon (DOC) (1.9-15 mg L-1) and hardness (21-270 mg CaCO3 L-1 hardness), with 20-70% of total dissolved copper being present as labile copper. Toxicity decreased with increasing DOC and hardness. Strong linear relationships existed between the EC50 for C. dubia and DOC, and when the EC50 was related to either the labile copper concentrations measured by DMG (r2 = 0.874) or the Chelex column (0.956) methods. The study demonstrates that the DMG passive sampler is a relevant tool for the in situ assessment of environmental risks posed by metals whose toxicity is strongly influenced by speciation.

Need for revisiting the terminology about speciation.

ᅟThe term speciation is used for over 30 years, with different meanings. In the early 2000s, a reference definition was proposed. The elemental distribution is discussed only with respect to molecular structures. Polytatomic entities such as amorphous or crystalline structures, dispersed in a liquid or gas, or in the solid phase, are not taken into account. The distribution of the element, both at the interfaces and in the solids, is not yet considered. This editorial discusses the limitations of this definition and its consequences. The different terminologies proposed from the reference definition are also discussed. Given all these considerations, it is proposed that speciation is considered as a description of the physical and chemical characteristics of an element. This description should be given from the atomic scale of this element to the scale of the surrounding medium, in the continuum of size, from the dissolved or gaseous phase to the solid phases.

The fate of iron nanoparticles in environmental waters treated with nanoscale zero-valent iron, FeONPs and Fe3O4NPs.

Among the different nanoparticles (NPs) that are used in the remediation of contaminated environmental waters, iron nanoparticles (FeNPs) are the most frequently applied. However, if these FeNPs remain in the waters after the treatment, they can cause a hazard to the environment. In this work the time dependent size distribution of iron particles was investigated in Milli-Q water, forest spring water and landfill leachate after a variety of FeNP treatments. The efficiency of the metal removal by the FeNPs was also examined. The concentrations of the metals in the aqueous samples were determined before and after the nano-remediation by inductively coupled plasma mass spectrometry (ICP-MS). The data revealed that the settling and removal of the FeNPs after the treatment of the waters was related to the sample characteristics and the ways of dispersing the NPs. When mixing was used for the dispersion, the nano zero-valent iron (nZVI), FeONPs and Fe3O4NPs settled quickly in the Milli-Q water, the forest spring water and the landfill leachate. Dispersion with tertramethylammonium hydroxide (TMAH) resulted in a slower settling of the iron aggregates. In the Milli-Q and forest spring waters treated with FeONPs and dispersed by TMAH, the nanosized iron remained in solution as long as 24 h after the treatment and could represent a potential threat in environmental waters with a low ionic strength. The removal of the metals strongly depended on the type of FeNPs, the chemical speciation of the elements and the sample matrix. If the FeNPs are contaminated by a particular metal, this contaminant could be, during the NPs treatment, released into the water that is being remediated.

Quantification of titanium from TiO2 particles in biological tissue.

This study presents the development of a strategy for the quantification of titanium from titanium dioxide polydisperse particles (TiO2) in dry biological tissue. Calf liver was chosen as laboratory testing material. The challenge was to (i) obtain a complete mineralization of the solid material (biological tissue and TiO2) and (ii) ensure the accuracy of the determined concentrations with a sufficient sensitivity. Mineralization was performed using a mixture of concentrated nitric and hydrofluoric acids. Atomic mass spectrometry associated with light-scattering technique was used to control the physical state (dissolved and particle forms) of titanium and reliably estimate the total titanium concentration in calf liver. The monitoring of (46)Ti and (49)Ti, operating in helium collision/reaction cell mode, and using external calibration with internal standard addition, allowed the quantification of Ti while removing isobaric interferences. The limit of detection and quantification were 0.7 and 2.3µg (Ti)g(-1) (tissue) respectively. The mean analytical recovery over the whole procedure was (103±6)% in a range of concentrations from LOD to 200µg(Ti)g(-1) (tissue).